Post Purchase

DUAL EDGE RXE

How to swap RXE rollers

A few easy steps from box to first session. Work through them in order, or jump to whatever you’re stuck on.

What's included

Step 01 / 05

What's included

Open it up and make sure you have everything on the packing list before you start.

  1. RXE Platform
  2. Flat Roller
  3. Unlevel Roller
  4. Rod
  5. Two Lock Nuts
  6. Two Washers
  7. Retaining Tool
  8. Wrench Tool
1 of 5

Dual Edge BXE

How to use your BXE.

What's included

Parts diagram
1 BXE Platform
2 Flat Edge
3 Unlevel Edge
4 Case Screws ×6
5 Mount Screws ×2
6 Extra Bands ×2
7 Mini Driver
1

Remove the two mounting screws from the back of the platform with a #2 screwdriver.

2

Twist and pull to remove the edge, then drop in the one you want. Retighten the screws snug.

1

Remove the top two and bottom four case screws with the supplied mini driver.

2

Carefully lift the top lid, and the edge if needed.

Careful Lift — don’t pry.
3

Slide the bands over the slide-plate back mount, then over the top mount.

4

Check the bands fully overlap and sit even, then reverse the steps to reassemble.

Note Run a maximum of 4 bands total for the best resistance.

Pro tips

Unlevel Edge, getting more from it.

A few things worth knowing. Watch the clip, then dig into the tips.

Before you load

Usually not in the box

Carabiner, loading pin, and plates are separate on most tools. Clip in, load up, train.

HardwareCarabiner not included
LoadLoading pin, weights, dyno, etc.
12kN carabinerTraining use only. Not for climbing. Isometric Training Platform · Traveler250g base · 500 lb rating · cam-strap slots FAQ · screws, sizing, returnsT25 #10 for holds · don’t overtighten

Finger & wrist health

Ease into new stimulus

Rolling edges, hubs, inch pinches, and fat grips load tissue differently than a fixed wood edge. First week is about learning the position, not chasing a max.

RXE / small edgeExperienced small edge history. Build slow.
Pinch / thumbWarm the thumb. 5–10s holds. Long rest.
Wrist toolsStart light. Control the full range.
Why One Inch Is the Hardest Pinch You’ll Train Which edge depth is right for me? RXE programming

Keep it working

Care and storage

A few rules that save returns and broken threads.

HardwareScrews snug, not overtight. Don’t force rollers or lids into place.
HeatKeep indoors. Avoid garages/attics over ~160°F.
Hold TextureFine grain is ready out of the box. No sanding needed.

Get more from the tool

How to train with it

Six reads matched to our best sellers. Setup gets you loaded. Programming is why you bought it.

Dual Edge + Unlevel Edge 22RXE + 28RXE Talon Ball Wrist Wrench Isometric Training Platform Brick Pinch
All training articles

Show it off

Tag us, we love to see it.

Love our tools, post it, and tag us. We repost the ones we like. No hashtag to remember, just the tag.

Open Instagram

Need help?

Let’s sort it out.

Tell us what’s going on and we’ll point you at the fix or hand you straight to a person.

SATISFACTION GUARANTEED · ZODIAC CLIMBING ·Our guarantee

Backed, no asterisks.

If what showed up isn’t right, or just isn’t what you expected, reach out. We’ll repair it, replace it, or sort it out.

Contact us